Case Insensitive, Keywrods Delimited by Verticla bar(virgule) "|".  
1)Extrusion Granulation Equipment    Single-screw Device   Twin-screw Device   Two-Stage Device   Plate Line   Auxiliary Machinery   Accessories  
2)PCB printed circuit board equipment    Testing Equipment   Cutting Equipment   Auxiliary Machinery   Materials and Accessories  
3)Medical equipment    supporting small family unit   Parts   Material  
4)SGS Report   
 
Home  Collection   E-mail  
Case Insensitive, Keywrods Delimited by Verticla bar(virgule) "|".  
1)Extrusion Granulation Equipment    Single-screw Device   Twin-screw Device   Two-Stage Device   Plate Line   Auxiliary Machinery   Accessories  
2)PCB printed circuit board equipment    Testing Equipment   Cutting Equipment   Auxiliary Machinery   Materials and Accessories  
3)Medical equipment    supporting small family unit   Parts   Material  
4)SGS Report   
Your current location: Products
Return to List
Product Name:PCB Lead Hot Air Leveler Machine (LD3000RZ/LD-2200RZ)
 
Product Introduction

PCB Lead Hot Air Leveler Machine (LD3000RZ/LD-2200RZ)

PCB Lead Hot Air Leveler Machine, Model: LD3000RZ or LD-2200RZ

(A) Brief
LD-3000RZ is the upgrade model of LD-2200RZ model, which preserve the original machine merits but also avoid the using of Lead element from environmental pollution. Starting from July 1st, 2006, the Lead-Free regulations have been applied. In order to assure your business in getting a larger market share and leadership, LD-3000RZ provide you a more reliable, high quality and reasonable price to get a better machine than from other competitor.

For your better understanding to this machine, the merits of this machine have outlin as below:

Elegant apperance, advanced mechanical design and arrangment, make this machine remarkable from similar machines. Stainless Steel is used, making the machine more durable and rust resisting. Key components like Tin Stirrer, Tin Tank and Air Blow assembly are made of Stainless Steel 316. Famous Japanese SMC pneumatic system is used. They are located in the front middle part of the machine. When you open the front doors, you can find these part out. In the front side of the machine, the control and display components are placed. Operator can find readings such as: Tin Tank Temp, Blow Air Pressure and Temperature. With these figures, operator can control precisely the parameters for better process performance. On top of the machine, the electrical and control components are placed, which is further away and insulated from the heated part of the machine, which can increase the stability and longevity of the machine.

The advanced air knife design makes the air blowing stronger and evenly distributed, ensure higher Tin Sprayding quaility for SMT enquirement. Raw material of Air knife is from Germany and with heat treatment. The dimensions will be quite constant during the operation process, and with the advanced aerodynamic design, the pressurized air will be blown out evenly on the panels.
Air Knife angle and gap are adjustable. Tin coating thickness and smoothness can be made by suitable adjustment.

The exhausted air produced during processing are expelled out by the internal exhasut system. Both the operator and machine components are protected from these damaging gases. Therefore, the operation environment and the production efficiency are improved.

There are 2 fixtures for the panels. One is the hanger type, which is easier to be operated and with higher efficiency. The other is the clamped type, this is normally for repairing those boards which need further touch up after spraying.

To ensure better stability and longevity of the mahince, most of the electrical and pneumatic control components are from world famous brand name suppliers.

The heated tanks are designed with high heating efficiency and easy maintanence concepts. Most heaters are directly attached to the tanks wall which make the heating path shortest and fastest. Most heaters adoted the push-pull design for easy installation and maintanence, and are insulated from the outside machine walls to reduce heat loss.

The Blow Air heating process are of high design technology too. The front and rear air knife blow air is heated up from independent heating tanks. The heating time and path is increased by a series of heating elements. The Blow Air volume and temperature required is ensured.

Specification
1. Outter Dimension: 1650& times; 1326& times; 2500(L& times; W& times; H)mm;
2. Max. Panel Size: 610mm& times; 610mm(24" & times; 24" );
3.         Panel Thickness: 0.8-3mm;
4.         Tin Tank Volume: 350kg;
5.         Air Knife Pressure: 0-5kg/c2, Adjustable;
6. Air Knife Gap: 10mm-20mm, Adjustable;
7. Pressure Tank Requirement: 6-8kg/c2;
8. Temperature Control System:
9. Temperature Range: Room Temp-280;
      Display Accuracy: 1;
10. Dip Time Interval: 0-10 sec, Adjustable;
11. Blow Off Interval: 0-10sec, Adjustable;
12. Power Rating: Max. 56KW(, 36KW; Under Normal Operation, 36KW);
13. Power Source: 3 phase, 4 wires;
14. Weight: 600kg.                                                                                                
 
 

    
Home | Products | News | Message | About Us | Contact Us
copyright @2011 www.sunnyelec.com limited,all rights reserved nanjing sunny machinery & electronics co.,ltd
Add.: Block C1, 30th floor, Shangmao New Century Plaza, 49 Zhongshan South Road, Nanjing,China.210005
Tel.: 86-25-86893185, Fax.: 86-25-86893190 e-mail:shenlin@sunnyelec.com  苏ICP备05033773号 Best Resolution:1024*768